This adapter card can transfer out 4 M.2 (M-Key) interfaces through the PCIe x 16 slot of the host. It uses real PCIe 3.0 x16 bus bandwidth and the transmission bandwidth can reach 128Gb/s. Users can connect four NVMe M.2 SSDs. Each NVMe M.2 SSD has independent PCIe 3.0 x4 bandwidth, giving full play to the transmission performance of NVMe M.2 SSDs.
4 M.2 (M-Key) interfaces
It adopts a unique hardware architecture, is equipped with 4 M.2 (M-Key) interfaces, and fully supports the M.2 SSD solid state drive of the NVMe protocol of the PCI-E channel. Easy to install, no drivers required.
NVMe SSD: supports 2230, 2242, 2260, 2280 sizes.
Motherboard: Supports PCIe 3.1, 3.0, PCIe 2.0 motherboard.
PCIe 3.0x16 bandwidth
Using true PCIe3.0x16 transmission technology, it provides independent PCIe3.0x4 (16Gb/s) bandwidth for each M.2 SSD to use, releasing the true potential of NVMe storage devices. The independent and unrestricted NVMs SSD solution is Intel DMI 3.0 8x speed of NVMe solution under the architecture.
Dual cooling: full metal heat sink + built-in fan
The all-metal heat sink casing and built-in fan design can continuously and efficiently dissipate the heat generated by the hard drive, and are wear-resistant and compressive to protect the hard drive.
System requirements: Windows 7 or above, Linux Kernel 4.6.4 or higher, and the PC host has an available PCI Express x16/x32 slot.
Wide range of applications
Designed specifically for servers, high-end desktops and workstation platforms, the transmission performance is 4 times faster than motherboard NVMe solutions and 21 times faster than traditional SATA SSD. It is widely used in high-performance computing, meteorology, bioengineering, simulation, Film and television industries.
