By PURPLELEC | 22 April 2024 | 0 Comments
Universal four-channel 20GB USB3.0 expansion card
The universal four-channel 20GB USB3.0 expansion card will allow users to add 4 independent USB 3.0 ports to a desktop computer or server, with bandwidth up to 5 Gbps per channel and a total bandwidth of 20Gbps. Built-in 15Pin power input power supply socket, each interface runs 5V power output at the same time. Complies with Intel's Extensible Host Controller Interface (xHCI) specification revision 1.0 and supports hot plugging.
This is an industrial-grade high-performance USB adapter card, suitable for most USB interface devices, including industrial cameras, SSD/HDD chassis, flash drives, VR playback boxes, live broadcast equipment, etc.
PCIE 2.0 X4 design
Using PCIE2.0 X4 design, suitable for PCI Express X4, X8, X16 slots. Not suitable for PCIE X1 slot, not for PCI slot. Short iron pieces are delivered and can be used in both large and small chassis. Supports the following high-speed data rates: low speed (1.5Mbps)/full speed (12Mbps)/high speed (480Mbps)/super high speed (5Gbps).
4 USB 3.0 interfaces
Equipped with 4 independent USB 3.0 ports, each port can achieve up to 5Gbps bandwidth, with a total bandwidth of 20Gbps. Users can operate multiple USB 3.0, USB 2.0 and USB 1.1 devices simultaneously.
15Pin power supply
It has a built-in 15Pin power input power supply socket, which provides stable and sufficient power supply. It also runs 5V power output for each interface. Ensure the stable operation of the equipment during data transmission, low power consumption, environmental protection and energy saving. Power input: 15 Pin SATA CD-ROM type power connector, power output: 5V/900mA from Type A port.
System Requirements
Windows 8.x / 10 (X86/X64) (Windows built-in driver), Linux 2.6.31 or higher (Linux operating system has implemented USB3.0 driver), Mac OS.
Leave a Reply
Your email address will not be published.Required fields are marked. *