By PURPLELEC | 01 August 2024 | 0 Comments
How to install the video capture card and driver?
How to install the video capture card and driver? This article details the specific steps and methods for correctly installing the video capture card and driver.
I. Video capture card hardware installation
1. Turn off the computer power, open the chassis, and install the video capture card in an empty PCI or PCI-E slot (PCI capture card is installed in the PCI slot, PCI-E interface capture card is installed in the PCI-E slot). Remember to turn off the power during installation.
2. Take out the screws from the video capture card packaging box and fix the video capture card on the chassis (all 3D video capture cards are equipped with fixing screws. Professional capture cards are equipped with a small baffle and can be installed in 2U and other chassis).
3. Connect the signal line of the video source output line (camera, camcorder, recorder, computer graphics card) to the video capture card.
The above is only the hardware installation of the video capture card. You also need to start the computer to install the driver and software.
II. Video capture card driver and software installation
1. Install the driver. Many video capture cards require the installation of drivers before they can be used. Some capture cards do not require driver installation, such as the 3D T810 NLE card. You can directly open the corresponding NLE software to capture.
2. Put the video capture card installation disk into the optical drive. The manual will explain which CD is the driver disk. The text on the CD usually has Chinese driver, and the English driver usually has or .
3. Select the video capture card driver of the relevant model. The CD that comes with the product is divided into pages, which generally contains drivers for a series of products of the company, so you must select the capture card driver of the same model.
4. Select "Install Driver", "Install SDK Development Kit", and "Install Application Client Server" in sequence.
5. Start the computer, and the system will display that new hardware has been found; insert the capture card driver CD into the optical drive, select "Automatically install driver", select "Select location", and copy the driver folder CD to the operating system corresponding to the drive letter. (If you are using XP system, select winxp directory) path, you will find the driver, just confirm.
6. Restart the computer to complete the software installation.
Not all capture cards require this step. Some video capture cards require the computer to be restarted before installing the driver and software.
Why can't the video capture card driver software be installed?
How to choose a DVI video capture card
Leave a Reply
Your email address will not be published.Required fields are marked. *