By PURPLELEC | 29 May 2024 | 0 Comments
YPbPr color difference component to VGA converter
YPbPr color difference component to VGA converter can convert traditional YPbPr color difference component signals into VGA signals for VGA display devices; it supports synchronous conversion of left and right channels and 3.5mm audio into 3.5mm audio output.
Specifications:
YPbPr input: 480i, 576i, 480p, 576p, 720p@60Hz,720p@50Hz, 1080i@60Hz, 1080i@50Hz, 1080p@50Hz, 1080p@60Hz
VGA input: VGA, SVGA, XGA, XVGA, UXGA
UGA output: 640*480, 800*600, 1024*768, 1280*1024,1440*900,1400*1050, 1680*1050, 1600*1200, 1920*1080, 1920*1200, etc.
Power supply: 9V or +12V DC@500mA
Anti-static for all video interfaces: 15KM
OSD menu function: Supported
Audio signal switching: Supported
Operation instructions:
MENU: Long press the MENU key to switch between input signal VGA and YPbPr output
When selecting YPbPr, the functions of the key are as follows:
MENU: Press this key once to display the OSD menu
UP: In the OSD menu, press the UP key to move up
In contrast, brightness, color saturation, hue, press the UP key to increase the value and press the MENU key to confirm; in resolution setting, press the UP key to move up, find the corresponding resolution and press the MENU key to confirm
DOWN: In the OSD menu, press the DOWN key to move down; in contrast, brightness, color saturation, hue, press the DOWN key to reduce the value and press the MENU key to confirm
In resolution setting, press the UP key to move up, find the corresponding resolution and press the MENU key
When VGA input, this key can only switch between VGA and YPbPr
UP In the OSD menu, long press the UP key to reset the resolution to 1024*768
Leave a Reply
Your email address will not be published.Required fields are marked. *