By PURPLELEC | 29 October 2024 | 1 Comments
How to connect Ethernet cable to laptop without Ethernet port?
If your laptop lacks an Ethernet port, don't worry! The solution is simple – the Purplelec USB-C to Ethernet Adapter.
The Purplelec USB C to Ethernet Adapter is an ideal solution for laptops, MacBook Pro, MacBook Air, iPad Pro, XPS and any other devices that are powered by USB-C technology. The adapter can achieve speeds up to 1 Gbps, providing you with quick and reliable Internet access. It is lightweight and compact(2.3 x 1 x 0.7 inches, 1.1oz), making it easy to carry in your pocket or bag.
Here's a step-by-step guide to set up an Ethernet connection using Purplelec USB-C to Ethernet Adapter.
1、Plug in the Adapter to Your Laptop:To start, plug the Purplelec USB-C to Ethernet Adapter into the USB-C port on your device.
2、Connect the Ethernet Cable to the Adapter:Plug one end of an Ethernet cable into your router or modem's Ethernet port and the other end into the Purplelec adapter's Ethernet port.
3、Set Up Your Laptop for Ethernet Connection:On your laptop, go to your network settings. Here you can set up a new connection or network. Just click on the Ethernet connection, and the laptop should automatically configure itself to use the Ethernet connection instead of Wi-Fi.
4、Check Your Connection:You can check your connection status in the network settings. If your laptop is connected properly through Ethernet, it will show as connected.
It's as simple as that! By using Purplelec USB-C to Ethernet Adapter, you turn a wireless-only laptop into one that can appreciate the stability and speed of hardwired internet.
FAQ
Here are some commonly asked queries on how to connect Ethernet cable to laptop.
How do I share Internet from my laptop via Ethernet?
In order to share internet from your laptop via Ethernet, you first need to generate a Wi-Fi connection. You then go to "Network and Sharing Center" and click on "Change adapter settings". Right-click on the Wi-Fi network you're connected to, go to "Properties" and select the "Sharing" tab. Find and tick the "Allow other network users to connect through this computer's Internet connection", select your Ethernet connection from the drop-down list and hit OK.
How do I reset my Ethernet port on my laptop?
You can reset your Ethernet port by disabling and then re-enabling it. To do this, proceed to the "Network and Sharing Center", choose "Change adapter settings", right-click on your Ethernet connection, and select "Disable". Wait a moment, then right-click again and select "Enable". If this doesn't work, consider rebooting your laptop or resetting your network settings.
Can I connect my laptop to the internet using Ethernet while Wi-Fi is also enabled?
Yes, you can connect your laptop to the internet using an Ethernet connection while your Wi-Fi is also enabled. However, to maximize your internet speed, your laptop will prioritize one connection over the other, usually the one that it considers to be faster. This is typically the Ethernet connection, as it tends to be more stable and faster than Wi-Fi.
What type of Ethernet cable for laptops?
For most laptops, a Cat 5e or Cat 6 Ethernet cable is sufficient for reliable internet connectivity. Cat 5e supports speeds up to 1 Gbps, while Cat 6 can handle up to 10 Gbps over short distances, making it ideal for faster networks. Choose Cat 6 or higher Ethernet cables for laptops if you need better performance or future-proofing.
How do I enable my Ethernet adapter on my laptop?
To enable your Ethernet adapter to laptops:
1、Open Settings or Control Panel.
2、Navigate to Network & Internet > Network and Sharing Center > Change Adapter S
3、Right-click on the Ethernet adapter and select Enable.
4、If it's not listed, try updating the adapter in Device Manager under Network Adapters.
Recently Reviews
Read MoreLeave a Reply
Your email address will not be published.Required fields are marked. *