PURPLELEC BLOG
Let Technology And Passion Collide To Generate More Inspiration. For questions about the blog, please contact the administrators or leave a message.
By PURPLELEC | 24 April 2025 | 0 Comments

Parade PS5512-4+1 USB3.2 GEN 2 HUB Controller

  Parade Technology has gradually integrated multiple signals into TBT TYPE C port, which has reduced the number of USB 3.2 GEN2 ports of the original TYPE A port. However, the original design of NB/DT still requires these output ports. Therefore, Parade has extended the HUB originally used in Docking Accessory and Monitor applications to NB/DT, so that EE RD can improve the USB TYPE A port. Parade also loads the strengths of ultra-low power consumption and high compensation signal loss in the power saving mode of high-speed signal field into this IC.
  Application Block:
USB 3.2 Gen2 10Gbps hub
  Main Functions:
  -Compliant with USB Specifications 1.1, 2.0 and 3.2
  --Provides two USB Gen2 Type-A downstream ports
  --Provides two USB Gen2 Type-C or Type-A downstream ports (integrated mux)
  --Provides one extra USB 2.0 downstream port
  -Fully supports low power states (USB 2.0 L0/L1/L2 and USB 3.2 U0/U1/U2/U3)
  -Supports overcurrent for gang mode and per-port mode
  -Supports power-enable for each downstream port
  -Billboard device support with programmable descriptors
  -Supports USB Battery Charging Specification V1.2
  -On-chip MPU with external SPI ROM interface
  -Supports firmware upgrade via I2C and USB
  -Secure in-field Firmware Protection/Upgrading
  --HW based RSA3072 signing
  --HW based SHA-256 authentication
  --Supported across all platforms
  -Up to two I2C channels, with both master and slave support
  -3V and 1.1V power supplies
  -Flexible GPIOs include one PWM output
  -0°C to 70°C Ambient Operating Temperature Range for PS5512QFN88GTR2
  -40℃ to 85°C Ambient Operating Temperature Range for PS5512QFN88ITR2
  -Package: 10mmx10mm QFN
  -Superior ESD performance: HBM 5KV
  Applications:
  -Laptops and Desktops
  -USB and Thunderbolt-based Docks
  -Monitors
USB 3.2 Gen2 10Gbps hub

  Specification:

  。Input Type C x1(Connect to host)

  。2xUSB A 3.2(Max 10Gbps data transmission)

  。2xType C 3.2(Max 10Gbps data transmission)

  。Aluminum housing+ABS

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
ver_code