By PURPLELEC | 18 April 2024 | 0 Comments
PCIe 3.0x1 to 10-port SATA 6G expansion card
This PCIe 3.0x1 to 10-port SATA 6G expansion card will allow users to add 10 independent SATA6G interfaces to desktop computers or servers, and the data transmission rate of each port can reach 6Gbps. It uses PCIE3.0 x1 bus bandwidth and has PCIE3.0 bandwidth that is twice as fast as PCIE2.0. Supports hot-swap, supports system boot disk, enlarges heat sink design, and has high-speed and stable performance. It is widely used in servers, industrial computers, consumer electronics equipment, storage devices and NVR/DVR systems. It is a solution launched to solve users' external multi-disk storage needs.
10 SATA interfaces
Equipped with 6 SATA interfaces, users only need to insert this card into the PCIE slot of the motherboard, and then connect 10 SSD solid-state drives or mechanical hard drives with SATA interfaces through the SATA data cable at the same time. Supports hot swapping and system boot disk.
PCIE 3.0 x1 bus bandwidth
Using PCI-Express x1 expansion interface, it has PCIE3.0 bandwidth that is twice as fast as PCIE2.0. Suitable for PCI ExpressX1, X4, X8, X16 slots, not suitable for PCI slots. Supplied with short iron pieces, it can be used in both large and small chassis.
system requirement
Windows OS, Linux, Mac OS
Leave a Reply
Your email address will not be published.Required fields are marked. *