By PURPLELEC | 24 October 2023 | 0 Comments
Disk array 2-bay 2.5-inch/3.5-inch hard disk enclosure
PEC-R1 is a dual-bay RAID 1/JBOD hard disk drive enclosure that supports two 2.5" SATA SSD/HDD or 3.5" SATA hard drives in two 5.25" device spaces of a computer/workstation system. PEC-R1 is equipped with The built-in hardware RAID chipset and easy-to-read RAID status LED indicators allow you to easily mirror 2.5" or 3.5" drives for data redundancy and monitor RAID status without pairing with a RAID card or using RAID monitoring software.
In addition, the built-in RAID chipset completes all calculations without using system resources, improving system performance compared to motherboard RAID or software RAID. Finally, the removable drive tray and hot-swap capabilities allow you to replace a failed drive without shutting down the system, making the PEC-R1 an ideal drive extraction for mission-critical computing systems such as industrial automation systems and file server systems. box.
Built-in RAID 1 and JBOD
With the built-in JMS562 RAID chipset, you can easily add a RAID 1 array to any computer system using SATA connections, without the need for a RAID controller card or RAID-compatible motherboard. Just connect the RAID enclosure to the system's SATA and power interfaces, plug in two 2.5" or 3.5" hard drives, and FatCage will automatically mirror the hard drives to achieve data redundancy to prevent data loss or system downtime caused by hard drive failure. Additionally, the newly added JBOD mode allows you to view two separate hard drives (requires SATA port-multiple) or erase a RAID table from the hard drive without using hard drive erasing software or MS-DOS commands.
Advanced RAID status indicator
PEC-R1 is equipped with an easy-to-identify RAID status LED indicator, which can monitor the RAID 1 status during operation, so users can quickly grasp the real-time RAID status without installing RAID monitoring software. However, if your application requires the use of RAID monitoring software, it needs to be downloaded and installed on a Windows/Mac computer.
Removable hard drive tray
PEC-R1 features a removable EZ-Tray hard drive tray, allowing users to install or remove hard drives without opening the case or turning off the computer power. EZ-Tray supports 2.5" SSD/HDD and 3.5" hard drives, and is compatible with FatCage and DataCage series hard drive trays, including DataCage MB876SK-B (1 bay), FatCage MB153SP-B (3 bays) and MB155SP-B (5 trays). This allows you to continue to use the same trays in these drive trays and swap drives between systems without having to remove the drive from the tray.
EMI anti-electromagnetic interference grounding
It is very important to ensure that the hard drive is properly grounded, especially when the hard drive is inserted and removed multiple times. If it is not properly grounded, electrostatic shock is likely to occur, which will damage the hard drive and even cause the loss of important data. Our EMI grounding technology ensures that HDD/SSD are stored in a stable and safe environment, improving reliability.
Ventilation hole design
There are large vents around the fuselage that work with the computer's cooling system to keep the hard drive running at optimal temperatures.
PEC-R1 supports a buckle-type 15-pin power cord, so you don’t have to worry about the cord accidentally disconnecting from the device. Once the wires are connected, they will stay locked in place.
RAID hard drive trays are available in a variety of options and specifications, including dual-bay 2.5" or 3.5" drives for 5.25" installation spaces, dual-bay 2.5" drives for 3.5" installation spaces, and dual-bay 2.5" drives for 3.5 " HDD installation space. Whether you are looking for an ultra-compact RAID hard drive enclosure or an advanced RAID hard drive enclosure, Purplelec can provide you with the perfect solution!
Leave a Reply
Your email address will not be published.Required fields are marked. *