By PURPLELEC | 15 April 2024 | 0 Comments
desktop PCIe 3.0 to 4-port SATA 6Gbps expansion card
This desktop PCIe 3.0 to 4-port SATA 6Gbps expansion card will allow users to add 4 independent SATA6G interfaces to desktop computers or servers, and the data transmission rate of each port can reach 6Gbps. Adopting super PCIe Gen3x1 line bandwidth design, the theoretical maximum bandwidth can reach 16Gbps. Supports 5 disk groups soft RAID, supports hot swapping, supports system boot disk, supports UEFI (Unified Extensible Firmware Interface), and has high-speed and stable performance. It is widely used in servers, industrial computers, consumer electronics equipment, storage devices and NVR/DVR systems. It is a solution launched to solve users' external multi-disk storage needs.
4 SATA interfaces
Equipped with 4 SATA interfaces, users only need to insert this card into the PCIE slot of the motherboard, and then connect the SSD solid state drives or mechanical hard drives of 4 SATA interfaces at the same time through the SATA data cable. Supports hot swapping, system boot disk, and UEFI (Unified Extensible Firmware Interface).
PCIE 3.0 x1 bus bandwidth
Using PCIE3.0 bus bandwidth, the data transmission speed is much faster than PCIE2.0. Each channel supports transfer rates of 2. 5Gb (250MB/s), 5Gb (500MB/s) or 8Gb (1GB/s).
PCIE X1 design is suitable for PCI ExpressX1, X4, X8, and X16 slots. Not suitable for PCI slots. Supplied with short iron pieces, it can be used in both large and small chassis.
System Requirements
PCI Express-enabled systems with one available PCI Express slot, Windows10/8.x/7 (32/64-bit)/Vista/Server 2003/XP/2000, MacOS 10.x, Linux 2.4.x and more High version.
Wide application areas
Mainly used in PC computer servers, industrial computers, consumer electronics equipment, storage equipment, and NVR/DVR systems.
Leave a Reply
Your email address will not be published.Required fields are marked. *