PURPLELEC BLOG
Let Technology And Passion Collide To Generate More Inspiration. For questions about the blog, please contact the administrators or leave a message.
By PURPLELEC | 21 September 2024 | 0 Comments

Why Can't My Hard Drive Enclosure Connect the Hard Drive Disk?

  1、Why can’t my hard disk enclosure read or recognize the hard disk?
  Note: Given the hard disk itself is working well, please kindly check all the devices according to these steps.
  A. The new hard disk needs to be formatted.
  B. Since M.2 hard disk has two protocols: SATA protocol and NVMe protocol, choose NGFF for hard disk with SATA, and choose NVMe for hard disk with NVMe protocol.
  C. Be sure you choose the right data cable - USB and Type -C.
  D. Check the LED light.
hard drive disk enclosure
  2、Why can’t my hard drive dock read or recognize the hard disk?
  Note:A new hard disk should be formatted before it is used.
  A. Check the USB connection. Go to the computer and right-click, check disk management and the status - maybe the system's allocation of a drive letter is wrong.
  B. Check whether one of the hard disks is offline. If so please connect the offline hard disk again.
  C. Please confirm your port - the computer interface usually is eSATA. Generally, most of computer’s eSATA interface doesn’t have PM port (it has copy function). The eSATA port only can recognize one hard disk. But, our Multiple USB port and our expansion’s in eSATA’s port can recognize two hard disks at the same time.
hard drive disk enclosure
  3、Why can’t my multi bay HDD enclosure read or recognize the hard disk?
  Note:A new hard disk should be formatted before it is used.
  A. When there is no disk letter : right-click "Computer", then click "Manage", open and enter "Disk Management", find the newly hard disk, right-click "Initialize", select "MBR (hard disk capacity less than or equal to 2TB)" or "GPT (More than 2TB)", and then set up "New Simple Volume" - the default is to format the partition in the next step. After the format is completed, the hard disk can be used normally, and then newly drive letter will be displayed.
  B. Please check whether the power adapter is connected or not.
  C. If the computer with multiple hard disks only recognizes one piece, then the reasons may be: 1). The enclosure connected to the hard disk interface may be damaged; 2). The hard disk is broken; 3). There is something wrong with the power adapter so it fails to drive multiple hard disks.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
ver_code