By PURPLELEC | 30 November 2023 | 0 Comments
PCIe3.0x1 to 8-port SATA6G expansion card
• This universal expansion card will allow users to add 8 independent SATA6G interfaces to desktop computers or servers, and the data transmission rate of each port can reach 6Gbps. It adopts super PCIe Gen3x1 line bandwidth design, supports 8 disk groups soft RAID, supports hot swapping, supports system boot disk, supports UEFI (Unified Extensible Firmware Interface), increases the heat sink design, and has high-speed and stable performance. It is widely used in servers, industrial computers, consumer electronics equipment, storage devices and NVR/DVR systems. It is a solution launched to solve users' external multi-disk storage needs.
Characteristics
• PCI-Expess3.0 1-lane interface, can be used for 1X, 4X, 8X, 16X and other PCIe slots
• Compliant with PCI Express Base Specification Revision 3.1a
• Automatically detect channel configuration at startup
•Support SATA interface hot-swappable
• Good heat dissipation design
•Supports standard iron pieces and short iron pieces
•Supports transmission rate of 2. 5Gb (250MB/s), 5Gb (500MB/s) or 8Gb (1GB/s) per channel
• Compliant with SATA specification revision 3.2
• AHCI Specification Revision 1.4
•Support 8-port SATA interface
•Support SATA interface LED indication
• Supports local command queue (NCQ)
• Support command switching of port multiplier
•Support partial/hibernation power management
•Support SATA access detection function
•Supports UEFI (Unified Extensible Firmware Interface)
•Support SATA Partial / Slumber power management
•Support SATA port doubling
System Requirements
• Windows OS,Linux,MAC OS
• PCI Express-enabled system with an available PCI Express slot
Why the computer usb root hub usb 3.0 is not working properly
M.2 x16 Gen5 expansion card for four PCIe 5.0 SSDs
Leave a Reply
Your email address will not be published.Required fields are marked. *