By PURPLELEC | 22 May 2023 | 0 Comments
How to install usb video capture card
Since the USB video acquisition card is a data acquisition device, it must be connected to the computer. The connection method between the USB video acquisition card and the computer is very simple, that is, data transmission and acquisition are performed through the USB data interface. Therefore, the first thing we need to do is to connect the capture card to the computer and then install it. First of all, we connect the USB interface of the acquisition card to the USB interface of the computer. As long as the connection is normal, the computer will usually automatically read the installation wizard.
After the installation wizard pops up, we select the advanced installation option, and after confirming that it is correct, click "Next". Select "Include this location in the search (0)" in the newly pop-up serial port, and then we use the mouse to click "Browse" to select the location where the device driver is located. After choosing our expected installation path, we click "Next" to continue the installation. During the installation process, a dialog box will pop up about whether to continue the installation, we just ignore it and click to continue the installation. Then we click "Finish" in the new window to complete the installation of the capture card.
USB video capture card management operation
After the installation is successful, we still need to operate according to the corresponding requirements. First check whether the device is normal, move the mouse cursor to: My Computer, right-click and select "Management". Select "Device Manager" in the pop-up window to view the current hardware devices. In "Sound, video and game controllers", we can see "USB MEDIA Captuer Device". If there is an exclamation mark or hello logo, you should restart the computer in time to fix the fault.
USB video capture card software installation
After the above hardware operations are prepared, the next thing we need to do is to install the software. We put the CD with the software installation program into the computer CD, and run the program "Application/Setup.exe" to install the software. Generally, the installation package of this program also includes development tools such as VC. Users can Carry out secondary development. After the software is installed, we can start the software through a shortcut on the desktop, and use the functions of the relevant video capture card for data collection and other operations
Recommend a useful 4K HDMI video capture card PEC-VS009 Differences between built-in acquisition cards and external acquisition cards
Leave a Reply
Your email address will not be published.Required fields are marked. *