PURPLELEC BLOG
Let Technology And Passion Collide To Generate More Inspiration. For questions about the blog, please contact the administrators or leave a message.
By PURPLELEC | 27 May 2024 | 0 Comments

KVM USB printer sharer

  The KVM USB printer sharer is a KVM USB printer sharer with 8 inputs and 2 outputs that supports manual switching and mouse and keyboard switching; it supports 8 computers sharing one printer: 81UA can manually control 8 computers through a set of keyboard, mouse, and monitor. It has a host machine, and there will be no problems such as computer crashes, black screens on monitors, and difficulty in using the keyboard and mouse that occur after switching with traditional manual switches.
KVM USB printer sharer
  Technical Parameters:
  VGA input/output resolution: VGA/SVGA/XGA/SXGAM/XGA/UXGA
  VGA input/output impedance: 750HM
  VGA input/output interface: DB15 female socket
  Audio input/output connector: 3.5mm audio socket
  USB input interface: USB-B female
  USB output interface: USB-A female
  Infrared remote control interface: 3.5mm socket
  Input cable length: ≤15m VGA AWG26
  Output cable length: ≤15m VGA AWG26
  USB cable length: ≤5m USB AWG24
  Maximum operating current: 300mA
  Power adapter specifications: AC 100V~240V (50/60HZ), DC 12V-1A
  Features:
  01. Support Microsoft mouse, Logitech mouse, etc.
  02. Support DOS, WIN3, WIN95/98/98SE/2000/ME/XP, WINNT/WIN7, WIN8, WIN 10, NETWARE, UNIX, LINUX
  03. Support plug-and-play, external power supply
  04.USB port supports USB Verl.l and USB Ver2.0
  05. The audio interface supports 3.5mm stereo
  06. Support button switching and remote control switching, automatic switching
  07. Supports widescreen monitors with resolutions up to: 1920*1440p
  08. Support online games and hard disk video recorders
  09. Transmission material: VGA end ≤ 30 meters; USB ≤ 5 meters
  10. Buzzer on/off and automatic scan on/off function
  11. After the device is powered on or re-powered, the default is automatic scanning mode and the buzzer is on.
  12. When there is no input signal to the VGA port in automatic scanning mode, the buttons and remote control have no effect.
  13. Turn off the automatic scanning mode. When there is no input signal to the VGA port, the buttons and remote control will work.
  14. Press and hold button 1 (BUZZER ON/OFF) for 3 seconds until you hear a beep to turn off the buzzer. Press again for 3 seconds to turn it on.
  15. Press and hold button 8 (SCAN ON/OFF) for 3 seconds until you hear a beep to turn off the automatic scanning function, and press it again for 3 seconds to turn it on.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
ver_code